Título :	SCADA Hardware Framework based on Modular FPGA
Autor(es):	Luis Ernesto Fernández Rodríguez
Palabras clave:	FPGA Control PLC NIOS SCADA
Área:	INGENIERÍA Y TECNOLOGÍA
Fecha de publicación :	11-nov-2020
Facultad:	Facultad de Ingeniería
Programa académico:	Ingeniería en Automatización
Resumen:	This project describes the hardware design of a Supervision, Control and Monitoring System, SCADA, implemented by means of a Field Programmable Gate Array, FPGA. Implementing an FPGA allows the end user to tailor the controller to the application, with capabilities such as parallel processing, reconfiguration, and deployment of hardware accelerators. In an industrial environment this entails a system that is more economical than the commercially available alternatives (PLCs, SCADAs and distributed control systems), up to 90 % considering the cost of developing the prototype, and with a flexible, adaptable architecture and higher performance. The proposed hardware consists of four parts, analog and digital input and output cards, communications, and a base board connected to the FPGA.
URI:	http://ri-ng.uaq.mx/handle/123456789/2499
Aparece en:	Ingeniería en Automatización

Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.