Por favor, use este identificador para citar o enlazar este ítem: https://ri-ng.uaq.mx/handle/123456789/1200
Título : Síntesis y características estructurales de la doble perovskita Sr2FeMoO6
Sustentante: Jesus Valdes Hernandez
Palabras clave : INGENIERÍA Y TECNOLOGÍA
Fecha de publicación: jun-2018
metadata.dc.degree.department: Facultad de Ingeniería
metadata.dc.degree.name: Maestría en Ciencias (Nanotecnología)
Descripción : La doble perovskita Sr2FeMoO6, que se caracteriza por poseer una magnetoresistencia colosal y un comportamientomedio-metálicoa temperatura ambiente, ha generado un gran interés de estudiogracias a sus aplicaciones para dispositivosmagnéticosde almacenamiento digital. Una de las rutas de síntesis más utilizadas para la síntesis de este sistema es el método de sol-gel, la grandifusión de los reactivos que se logra,aunado a un gran control sobre la morfología del sistema han convertido a este método en una ruta llamativapara la síntesis de materiales cerámicos. De igual forma, el método hidrotermal asistido por microondas, que logra uncalentamiento uniformea través de toda la solución y su capacidad de llevar a cabo reacciones que no se propicianbajo condiciones típicas, convierte a este método en una ruta atractiva. Esta tesis presenta el estudio del efecto que consiguelasíntesisdel sistema Sr2FeMoO6por el método combinado de sol-gel y el proceso hidrotermal asistido por microondas. La caracterización de la estructura y microestructura de los polvos preparados por los distintos métodos se logró a partir del método de difracción de rayos X (XRD) y microscopía electrónica de barrida (SEM).
Double perovskite Sr2FeMoO6which is characterized by its colossal magnetoresistance and half-metallic behavior, have drawn attention in view of their application in digital magnetic recording devices. One of the synthesis routes most used for this system is the sol-gel method, the great diffusion of the reagents that is achieved, combined with a great control over the morphology of the system have turned this method into a prominent route of ceramic materials synthesis. Similarly, the hydrothermal microwave-assisted method, which achieves uniform heating throughout the solution and its capability to carry out reactions that are not propitiated under typical conditions, makes this method an attractive route. This thesis presents the study of the effect obtained by the synthesis of theSr2FeMoO6 system by the combined method of sol-gel and the hydrothermal process assisted by microwaves. The characterization of the structure and microstructure of the powders prepared by the different methods was obtained from the X-ray diffraction (XRD)and scanning electron microscopy (SEM) method.
URI : http://ri-ng.uaq.mx/handle/123456789/1200
Otros identificadores : síntesis por sol-gel
calentamiento por microondas
doble perovskita
proceso hidrotermal
Aparece en las colecciones: Maestría en Ciencias (Nanotecnología)

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
RI004290.pdf6.68 MBAdobe PDFVista previa
Visualizar/Abrir


Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.