Título :	SCADA Hardware Framework based on Modular FPGA
Sustentante:	Luis Ernesto Fernández Rodríguez
Palabras clave :	INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS TECNOLOGÍA ELECTRÓNICA
Fecha de publicación:	11-nov-2020
metadata.dc.degree.department:	Facultad de Ingeniería
metadata.dc.degree.name:	Ingeniería en Automatización
Descripción :	This project describes the hardware design of a Supervision, Control and Monitoring System, SCADA, implemented by means of a Field Programmable Gate Array, FPGA. Implementing an FPGA allows the end user to tailor the controller to the application, with capabilities such as parallel processing, reconfiguration, and deployment of hardware accelerators. In an industrial environment this entails a system that is more economical than the commercially available alternatives (PLCs, SCADAs and distributed control systems), up to 90 % considering the cost of developing the prototype, and with a flexible, adaptable architecture and higher performance. The proposed hardware consists of four parts, analog and digital input and output cards, communications, and a base board connected to the FPGA.
URI :	http://ri-ng.uaq.mx/handle/123456789/2499
Otros identificadores :	FPGA Control PLC NIOS SCADA
Aparece en las colecciones:	Ingeniería en Automatización

Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.